Ackurat Industriplast AB

We are in stand A11:25

Ackurat is an creative "småländskt" company with an wide range of products mainly small components partly or total runned in plastic.

Of the approx.10 000 differ standard components are about 70 percent made in the factory in Lammhult.

If you are not finding what you need in our wide range of standard products,we could easily tailormade an special component for you.

Our unique mould system and our ways to work towards our clients makes us very cost effective in small and middle size volymes.

You can check out our wide assortment on www.ackurat.com

You are very welcome to visit us at our stand A19:13!

Trademark

Ackurat
Ackurat
Ackurat

Products

Connector Group CLIXTAG 45 Connector. With this fitting, you easily join two boards Both joint surfaces shall have tw 4 mm grooves intednded for the fittings. Glue can be applied to the joint and the joint can be machined afterwards without the risk of the tools being destroyed. Link to the product »
Connector Group CLIXTAG 45 Connector. With this fitting, you easily join two boards Both joint surfaces shall have tw 4 mm grooves intednded for the fittings. Glue can be applied to the joint and the joint can be machined afterwards without the risk of the tools being destroyed. Link to the product »
Fixing plug Group IBIP-001 Fixing plug . Fixing plug suitable for fast assembling of backsides on cabinets. The plug also makes it easy to disassemble a cabinet. Link to the product »
Fixing plug Group IBIP-001 Fixing plug . Fixing plug suitable for fast assembling of backsides on cabinets. The plug also makes it easy to disassemble a cabinet. Link to the product »
Table connector Group SPSP-KB13 Table connector. Brackets intended to be used when connecting tables. Link to the product »
Table connector Group SPSP-KB13 Table connector. Brackets intended to be used when connecting tables. Link to the product »
Seat runner Group SPSP-KB12 Seat runner. Runner suitable for hanging chairs under tables and desks. Link to the product »
Seat runner Group SPSP-KB12 Seat runner. Runner suitable for hanging chairs under tables and desks. Link to the product »
Sofa connector Group SPSP-KB11 Sofa connector. Brackets intended to be used when connecting modular furniture. Link to the product »
Sofa connector Group SPSP-KB11 Sofa connector. Brackets intended to be used when connecting modular furniture. Link to the product »
Hook-on fitting Group SPAP-001 Hook-on fitting. This hook makes it easier to hang the chair on the edge of the table which makes the cleaning work more effective. The fitting is mounted under the chair seat and the hooks folds automatically in under the seat when not in use. Link to the product »
Hook-on fitting Group SPAP-001 Hook-on fitting. This hook makes it easier to hang the chair on the edge of the table which makes the cleaning work more effective. The fitting is mounted under the chair seat and the hooks folds automatically in under the seat when not in use. Link to the product »
Chair link Group SCSC-001 Chair link. Foldable chair link for mounting on tubes under the seat. The link makes it possible to replace a chair in the middle of a row without moving other chairs. The arms have a fixed locations in the folded position. Information on the test of linked chairs are available in EN 14703:2007.

NOTE: 1 pc = One link and two position clips. A small hole is drilled in the tube for the positioning clips. Link to the product »
Chair link Group SCSC-001 Chair link. Foldable chair link for mounting on tubes under the seat. The link makes it possible to replace a chair in the middle of a row without moving other chairs. The arms have a fixed locations in the folded position. Information on the test of linked chairs are available in EN 14703:2007.

NOTE: 1 pc = One link and two position clips. A small hole is drilled in the tube for the positioning clips. Link to the product »
Chair link Group SPSP-KB10 Chair link. Foldable chair link with the possibility to replace a chair in the middle of a row without moving other chairs. The arms have a fixed location in the folded position. Mounted on the frame. Information on the test of linked chairs are available in EN 14703:2007.

NOTE: 1 pc = One link and one bracket. Screws not included. Link to the product »
Chair link Group SPSP-KB10 Chair link. Foldable chair link with the possibility to replace a chair in the middle of a row without moving other chairs. The arms have a fixed location in the folded position. Mounted on the frame. Information on the test of linked chairs are available in EN 14703:2007.

NOTE: 1 pc = One link and one bracket. Screws not included. Link to the product »
Chair link Group SPSP-KB9 Chair link. Foldable chair link with the possibility to replace a chair in the middle of a row without moving other chairs. The arms have a fixed location in the folded position. Mounted on the seat. Information on the test of linked chairs are available in EN 14703:2007.

NOTE: 1 pc = One link and one bracket. Screws not included. Link to the product »
Chair link Group SPSP-KB9 Chair link. Foldable chair link with the possibility to replace a chair in the middle of a row without moving other chairs. The arms have a fixed location in the folded position. Mounted on the seat. Information on the test of linked chairs are available in EN 14703:2007.

NOTE: 1 pc = One link and one bracket. Screws not included. Link to the product »
Chair link Group SPSP-KB6 Chair link. Very strong foldable chair link with the possibility to replace a chair in the middle of a row without moving other chairs. The arms have a fixed location in the folded position. Information on the test of linked chairs are available in EN 14703:2007.

NOTE: 1 pc = One link and two position clips. Screws not included. Link to the product »
Chair link Group SPSP-KB6 Chair link. Very strong foldable chair link with the possibility to replace a chair in the middle of a row without moving other chairs. The arms have a fixed location in the folded position. Information on the test of linked chairs are available in EN 14703:2007.

NOTE: 1 pc = One link and two position clips. Screws not included. Link to the product »
Chair link Group SPSP-KB7 Chair link. Very strong foldable chair link with the possibility to replace a chair in the middle of a row without moving other chairs. The arms have a fixed location in the folded position. Mounted on the frame. Information on the test of linked chairs are available in EN 14703:2007.

NOTE: 1 pc = One link and two position clips. Screws not included. Link to the product »
Chair link Group SPSP-KB7 Chair link. Very strong foldable chair link with the possibility to replace a chair in the middle of a row without moving other chairs. The arms have a fixed location in the folded position. Mounted on the frame. Information on the test of linked chairs are available in EN 14703:2007.

NOTE: 1 pc = One link and two position clips. Screws not included. Link to the product »
Chair link Group SCSC-KB11 Chair link. Chair link for parallel legs. Information on the test of linked chairs are available in EN 14703:2007. Link to the product »
Chair link Group SCSC-KB11 Chair link. Chair link for parallel legs. Information on the test of linked chairs are available in EN 14703:2007. Link to the product »
Chair link Group SCSC-KB8 Chair link. Chair link for parallel horizontal (sled base chair) legs. The link is closed by pressing by hand or with a soft tool. Opening is to done with eg a coin. Information on the test of linked chairs are available in EN 14703:2007. Link to the product »
Chair link Group SCSC-KB8 Chair link. Chair link for parallel horizontal (sled base chair) legs. The link is closed by pressing by hand or with a soft tool. Opening is to done with eg a coin. Information on the test of linked chairs are available in EN 14703:2007. Link to the product »
Foot-holder Group PINOCKIO-001A Foot-holder. Nail it with Ackurat’s combination system PINOCKIO.

The system is a clever interchangeable system built on attaching system where a Foot-part with a “pin” is fitted into a Foot-holder. NOTE! Use together with group PINOCKIO-001B. Link to the product »
Foot-holder Group PINOCKIO-001A Foot-holder. Nail it with Ackurat’s combination system PINOCKIO.

The system is a clever interchangeable system built on attaching system where a Foot-part with a “pin” is fitted into a Foot-holder. NOTE! Use together with group PINOCKIO-001B. Link to the product »
Foot-part Group PINOCKIO-001B Foot-part. Nail it with Ackurat’s combination system PINOCKIO.

The system is a clever interchangeable system built on attaching system where a Foot-part with a “pin” is fitted into a Foot-holder. NOTE! Use together with group PINOCKIO-001A. Link to the product »
Foot-part Group PINOCKIO-001B Foot-part. Nail it with Ackurat’s combination system PINOCKIO.

The system is a clever interchangeable system built on attaching system where a Foot-part with a “pin” is fitted into a Foot-holder. NOTE! Use together with group PINOCKIO-001A. Link to the product »
Glide plug Group IC-IFF Glide plug. With thick, felted glide surface.

With flanges. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Not suitable for holes in sheet metal etc. NOTE: Less suitable for concrete and tiled floor. Link to the product »
Glide plug Group IC-IFF Glide plug. With thick, felted glide surface.

With flanges. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Not suitable for holes in sheet metal etc. NOTE: Less suitable for concrete and tiled floor. Link to the product »
Glide plug Group IC-IFSF Glide plug. With thick, tilted and felted glide surface.

With flanges. Less suitable for holes where sharp edges and shape variations may occur. NOTE: Less suitable for concrete and tiled floor. Link to the product »
Glide plug Group IC-IFSF Glide plug. With thick, tilted and felted glide surface.

With flanges. Less suitable for holes where sharp edges and shape variations may occur. NOTE: Less suitable for concrete and tiled floor. Link to the product »
Glide Group IC-004 Glide. Sound-absorbing material with flanges. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Not suitable for holes in sheet metal etc.

Should not be used on tilted chair legs. Only use where the angle leg / floor is 90 degrees. Link to the product »
Glide Group IC-004 Glide. Sound-absorbing material with flanges. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Not suitable for holes in sheet metal etc.

Should not be used on tilted chair legs. Only use where the angle leg / floor is 90 degrees. Link to the product »
Glide cap Group IC-005 Glide cap. Sound-absorbing material with flanges. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Not suitable for holes in sheet metal etc. Link to the product »
Glide cap Group IC-005 Glide cap. Sound-absorbing material with flanges. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Not suitable for holes in sheet metal etc. Link to the product »
Glide plug Group IC-LGP23 Glide plug. Flexible glide part attached with steel pin.

With flanges. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Not suitable for holes in sheet metal etc. Link to the product »
Glide plug Group IC-LGP23 Glide plug. Flexible glide part attached with steel pin.

With flanges. Suitable for tubes and deeper holes where sharp edges and shape variations may occur. Not suitable for holes in sheet metal etc. Link to the product »